Geotagging: use altitude when available
In addition to latitude and longitude my GPX tracks also contain the altitude for the point (http://www.topografix.com/gpx_manual.asp#ele). When available, this information should also be read and added to the metadata on export (field: GPSAltitude).
Displaying it in the GUI might not be necessary, as there is only a limited amount of screen space available and there are more important things to show.
#2 Updated by Roman Lebedev about 3 years ago
- bitness set to 64-bit
- Affected Version set to git development version
- System set to all
I since You have reported #10236, i assume you have access to such a camera?
I'm trying to find a CR2 from that camera with GPS enabled. (so that lat, log, elev and heading are stored in CR2)
(any canon camera that can natively attach gps logger and store such data in original CR2 would work, i just want unedited CR2 - data must be stored by camera, not later on in computer)
Maybe you could provide such a sample?
#7 Updated by Roman Lebedev about 3 years ago
- % Done changed from 50 to 70
- Status changed from In Progress to Patch attached
#8 Updated by Roman Lebedev about 3 years ago
- Status changed from Patch attached to Fixed
- % Done changed from 70 to 100
Applied in changeset darktable|69fe6e81b2b40b872b587453f78aaec463eeb739.