Camera Support #12431
Panasonic LX100II
100%
Description
Hi there, I'm new here so not very familiar with everything. Hope you can help me.
When I try to work with the rw2 file it shows the file in the lighttable but as soon as I try to work on it in the darkroom it says "not able to read out white balance data". In the picture information I can see that the lense is not recognized. A sample file is attached.
Associated revisions
History
#1
Updated by Roman Lebedev about 1 year ago
Updated by - % Done changed from 0 to 20
- Status changed from New to Incomplete
Please contribute the full sample set to https://raw.pixls.us/
#2
Updated by Michael Schmid about 1 year ago
Updated by All right, done!
#3
Updated by Roman Lebedev about 1 year ago
- % Done changed from 20 to 0
- Status changed from Incomplete to New
#4
Updated by Roman Lebedev about 1 year ago
- % Done changed from 0 to 20
- Assignee set to Roman Lebedev
- Status changed from New to Triaged
- Subject changed from Panasonic LX100II - Not able to read out white balance data to Panasonic LX100II
#5
Updated by Roman Lebedev about 1 year ago
Please contribute another sample set, in daylight, with much lower ISO.
These samples are so noisy, it is hard to tell what the right crop should be.
#6
Updated by Roman Lebedev about 1 year ago
- % Done changed from 20 to 100
- Status changed from Triaged to Fixed
Applied in changeset darktable|090a1e8fcdfe9c51fd9dfca10b867a9004395185.
#7
Updated by Michael Schmid about 1 year ago
I put a new sample set on. Kind of confusing that you put status to fixed. Still yet problem not fixed, still the same error message....
#8
Updated by Roman Lebedev about 1 year ago
It should be working with 2.6.0rc2
#9
Updated by Michael Schmid about 1 year ago
Thank you so much. So I guess 2.6.0rc2 is a new version of darktable. Is it? When will it be updated?
#10
Updated by Roman Lebedev about 1 year ago
- Target version set to 2.6.0
Panasonic DC-LX100M2 color matrix. Refs. #12431