Project

General

Profile

Camera Support #12041

Canon EOS 300D noise profile

Added by Peter Wemmert 4 months ago. Updated 2 months ago.

Status:
Closed: won't fix
Priority:
Low
Category:
-
Target version:
Start date:
02/28/2018
Due date:
% Done:

0%

Affected Version:
git master branch

Description

dt-noiseprofile-20180228.tar.gz uploaded.

I run darktable --noiseprofiles /home/macgyver/Bilder/Radera/Radera/darktable/tool
s/noise/b/presets.json but the name of my camera model was not in the list, see the print screen.

dt-noiseprofile-20180228.tar.gz (872 KB) Peter Wemmert, 02/28/2018 11:23 PM

Skärmbild från 2018-02-28 22-25-26.png (254 KB) Peter Wemmert, 02/28/2018 11:25 PM

History

#1 Updated by Peter Wemmert 4 months ago

Peter Wemmert wrote:

dt-noiseprofile-20180228.tar.gz uploaded.

I run darktable --noiseprofiles /home/macgyver/Bilder/Radera/Radera/darktable/tool
s/noise/b/presets.json but the name of my camera model was not in the list, see the print screen.

Perhaps due to this https://redmine.darktable.org/issues/11607 and my issues with this https://redmine.darktable.org/issues/11964

Link to the raw files https://drive.google.com/open?id=1_EDMPia8YYEfaLGasVHaw0-mBCCwMaOs

#2 Updated by Stefan Schöfegger 3 months ago

  • % Done changed from 0 to 20
  • Status changed from New to Triaged
  • Assignee set to Stefan Schöfegger

Profile looks good, expect iso 3200. In the manual I didn't find iso 3200, is this a special setting? In the manual only up to iso 1600 is mentioned.

#3 Updated by Peter Wemmert 3 months ago

Stefan Schöfegger wrote:

Profile looks good, expect iso 3200. In the manual I didn't find iso 3200, is this a special setting? In the manual only up to iso 1600 is mentioned.

I use a custom firmware. A modified 10D firmware. http://www.bobatkins.com/photography/digital/digital_rebel_firmware_hack.html If you want I can retake a couple of pictures at ISO H.

#4 Updated by Stefan Schöfegger 3 months ago

  • Status changed from Triaged to Closed: won't fix
  • % Done changed from 20 to 0

Peter Wemmert wrote:

I use a custom firmware.

Adding a profile from modified cameras does not make much sense. You can you your profile local but it can not be added to darktable.

#5 Updated by Peter Wemmert 2 months ago

Stefan Schöfegger wrote:

Peter Wemmert wrote:

I use a custom firmware.

Adding a profile from modified cameras does not make much sense. You can you your profile local but it can not be added to darktable.

True. I suppose it would be possible to use the noise profile from 10D at ISO 3200 because it is the same sensor and same firmware. ISO 100-1600 with my hacked firmware should be the same as in every 300D. 10D and 300D share the same hardware, but a hacker released the closed part in the 300D.

#6 Updated by Roman Lebedev 2 months ago

  • Target version set to 2.6.0

Also available in: Atom PDF