Project

General

Profile

Feature #11474

"image information" could show flash information

Added by Matthieu Moy about 2 years ago. Updated over 1 year ago.

Status:
Duplicate
Priority:
Low
Assignee:
-
Category:
General
Target version:
Start date:
01/22/2017
Due date:
% Done:

0%

Affected Version:
git master branch
System:
all
bitness:
64-bit
hardware architecture:
amd64/x86

Description

Currently, the "image information" box (both in lighttable and darkroom) show no information about the use of a flash.

This information is important to me to get better at using (or not using) a flash. For example, I do a lot of macro pictures and the use of the flash is really important. I tend to try a lot of setups and then compare the quality of the result, but to know which setup worked best I need the exif info ... For now, I have to open the file in another tool to find it.

exiftool can find it:

$ exiftool file.NEF | grep -i flash
Flash : On, Return detected
Flash Setting : Normal
Flash Type : Optional,TTL-BL
Flash Exposure Compensation : 0
External Flash Exposure Comp : 0
Flash Exposure Bracket Value : 0.0
Flash Mode : Not Ready
Manual Flash Output : Full
Flash Info Version : 0104
Flash Source : External
External Flash Firmware : 4.01 (SB-400)
External Flash Flags : Bounce Flash, [7]
Flash Commander Mode : Off
Flash Control Mode : iTTL-BL
Flash Compensation : 0
Flash Focal Length : 27 mm
Flash GN Distance : 0
Flash Color Filter : None
Flash Group A Control Mode : Off
Flash Group B Control Mode : Off
Flash Group C Control Mode : Off
Flash Group A Compensation : 0
Flash Group B Compensation : 0
Flash Group C Compensation : 0
External Flash Compensation : 0
Flash Exposure Comp 3 : 0
Flash Exposure Comp 4 : 0


Related issues

Duplicates darktable - Feature #8449: make image information module configurable Triaged

History

#1 Updated by Trolli Schmittlauch over 1 year ago

I guess that could be achieved with #9425.

#2 Updated by Roman Lebedev over 1 year ago

  • Duplicates Feature #8449: make image information module configurable added

#3 Updated by Roman Lebedev over 1 year ago

  • Status changed from New to Duplicate

#4 Updated by Roman Lebedev over 1 year ago

  • Target version set to 2.4.0

Also available in: Atom PDF