Project

General

Profile

Camera Support #11151

WB Presets, Noise Profile, Custom Matrix - FUJI X-T2

Added by Sascha DerKnipser over 3 years ago. Updated over 3 years ago.

Status:
Fixed
Priority:
Low
Assignee:
-
Category:
-
Target version:
Start date:
09/13/2016
Due date:
% Done:

100%

Estimated time:
Affected Version:
2.0.6

Description

Hi,

this case is related to Camera Support 11132.
https://redmine.darktable.org/issues/11132

The Fuji X-T2 is now officially available / released.
Stefan mentioned in the pull request for the fixed case 11132 to validate the settings after release of the camera (final firmware).
Shall I upload some example RAW files for validation? and if yes where?

And how can I help in getting WB Presets, Noise Profile and Custom Matrix for X-T2?

Thx in advance
Sascha

presets_KL1.json (4.27 KB) presets_KL1.json 1.) warm artificial light Sascha DerKnipser, 09/28/2016 10:43 PM
presets_KL2.json (4.29 KB) presets_KL2.json 2.) daylight Sascha DerKnipser, 09/28/2016 10:43 PM
presets_TL1.json (4.28 KB) presets_TL1.json 3.) cold artificial light Sascha DerKnipser, 09/28/2016 10:43 PM
dt-noiseprofile-20161001.tar.gz (4.29 MB) dt-noiseprofile-20161001.tar.gz denoise profiles Fuji X-T2 Sascha DerKnipser, 10/01/2016 11:22 PM

Associated revisions

Revision 32caf458 (diff)
Added by Johannes Hanika over 3 years ago

noiseprofiles: fuji x-t2. fixes #11151

History

#1 Updated by Roman Lebedev over 3 years ago

Sascha DerKnipser wrote:

Custom Matrix for X-T2?

No.
We don't take Custom Matrixes anymore, because we have no way to check their validity.
Much like with custom base/tone curves.

#2 Updated by Sascha DerKnipser over 3 years ago

Ok, clear.

The following topics are open:

1. validation of basic Fuji X-T2 support with pre-release firmware
2. WB Presets
3. Noise Profiles

I will try to generate some noise profiles according to your description.
But how to generate the WB presets? may I help on this too?

#3 Updated by Sascha DerKnipser over 3 years ago

Update:
1. validation of basic Fuji X-T2 support with pre-release firmware - OPEN
2. WB Presets - managed in case 11174 [[https://redmine.darktable.org/issues/11174]]
3. Noise Profiles - ONGOING (will finalize the profiles today or tomorrow)

#4 Updated by Sascha DerKnipser over 3 years ago

I have created three different sets of noise profile. The three jason files are added.
1.) warm artificial light
2.) daylight
3.) cold artificial light

The setting look totally different see example below:
1.) {"name": "X-T2 iso 200", "iso": 200, "a": [2.70441105158129e-06, 2.81445803388703e-06, 1.25374315852882e-05], "b": [6.07778304449494e-09, 4.07637250344436e-09, 1.47657984905615e-08]},
2.) {"name": "X-T2 iso 200", "iso": 200, "a": [4.08653869998594e-06, 2.71561102665035e-06, 4.85989472793932e-06], "b": [1.8282813034158e-08, 4.25802213459052e-09, 7.26141992824602e-09]},
3.) {"name": "X-T2 iso 200", "iso": 200, "a": [7.61199106909234e-06, 2.71229835290687e-06, 4.77068874310921e-06], "b": [-1.73779416086676e-10, 3.56988178464385e-09, 7.22974381290589e-09]},

Denoised images with all three profile look subjective identical. Is this always the case? I can upload the complete archive if needed
Sascha

#5 Updated by Sascha DerKnipser over 3 years ago

Finalized the Fuji X-T2 noise profiles.
Files attached

#6 Updated by Johannes Hanika over 3 years ago

  • % Done changed from 0 to 100
  • Status changed from New to Fixed

#7 Updated by Roman Lebedev over 3 years ago

  • Target version set to 2.2.0

Also available in: Atom PDF

Go to top